Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Alexandria?
Gate installation in Alexandria typically costs $1,800-$3,200 for a single-leaf swing gate on a residential driveway, and $3,500-$7,500 or more for a double-driveway gate with an automated operator. A basic manual gate with posts and hardware usually lands at $900-$1,800, while a full commercial or HOA entry system with access control runs $8,000-$15,000. Those ranges cover the gate, posts, operator and typical site work; the written estimate sets the final price.
We’re gate specialists, not generalists. Every job we quote is a gate job: from the motor to the hinge. Our technicians have up to 12 years of experience, and we work on the brand you already have, whether that’s LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite or Mighty Mule. For a closer look at our full range of Alexandria Gate Repair, start there.
Gate Installation Cost Breakdown (2026)
Here’s how the pieces of a new gate add up in the Alexandria market. Each range is typical for a residential driveway gate unless noted otherwise.
| Line item | Typical price range |
|---|---|
| Manual swing gate, single leaf, supplied and hung | $900-$1,800 |
| Manual double driveway gate | $1,800-$3,500 |
| Sliding gate, manual, up to 12 feet | $2,200-$4,200 |
| Swing gate operator, single arm, installed | $1,300-$2,400 |
| Sliding gate operator, installed | $1,500-$2,800 |
| Post setting and footing work (per post) | $150-$450 |
| Electrical run to gate location (per linear foot) | $12-$30 |
| Keypad, intercom or card reader | $350-$1,200 |
| Safety loops and reversing sensors | $250-$700 |
| Full automated double driveway system | $3,500-$7,500 |
| Commercial or HOA entry system with access control | $8,000-$15,000 |
What pushes a quote toward the top of these ranges? Heavier materials, a longer gate span, a longer electrical run from the house to the gate line, and added access control. What pulls it down? A short run, a lighter gate, or an operator installed on a gate that already exists and checks out. Alexandria properties in older neighborhoods often sit on tight lots where the gate line has to clear mature trees, an old retaining wall or a shared driveway, and that shaping work adds time to the job.
Material choice moves the number more than anything else. Aluminum and steel are the common picks for a residential driveway. Wood suits a historic property. Ornamental iron costs more per foot but lasts. The operator is a separate line from the gate itself, and you’ll see it itemized on the estimate so you know exactly what you’re paying for. For the repair side of the same work, our electric gate repair page covers what typically goes wrong with an existing system.
What Affects Gate Installation Pricing in Alexandria
- Gate material and weight. A light aluminum gate hangs faster and needs a smaller operator than ornamental iron, and the price reflects that. Heavier gates require stronger posts and a heavier-duty motor.
- Swing versus sliding. A swing gate needs level ground and clear space to arc open. A sliding gate needs a track and a run of clear ground alongside the opening. Sliding usually costs more because of the track, but it wins where the driveway slopes or the yard is tight.
- Electrical and access control. A gate is only automated if power reaches it. If the gate line is far from the panel, the electrical run adds cost fast. Keypads, intercoms and card readers are separate line items.
- Post setting and grade. Gate posts go to proper footing depth, and Alexandria’s clay-heavy soil and freeze-thaw winters mean we set posts deep and brace them carefully. A low spot or a slope at the gate line means extra grading or a deeper footing.
- Permits and HOA rules. Many Alexandria properties sit under an HOA or in a historic district where gate style, height and placement need approval before anything gets built. Check with the city and your HOA early; approval delays are the most common reason a project stalls.
- Brand and operator features. A basic operator and a full-featured one with battery backup, soft start and smartphone control are priced differently. We’re familiar with nine major brands, so we quote the operator that fits your gate rather than steering you to a brand switch.
How to Save on Gate Installation
The biggest cost lever is the gate itself. Choosing a standard-width, standard-material gate over a custom ornamental build can cut the gate line substantially, and you keep the same operator. Here’s what else helps:
- Keep the gate line close to power. The electrical run is priced per foot. If there’s any flexibility in where the gate goes, pick the spot nearest the panel or an existing outdoor circuit.
- Choose a swing gate where the ground allows. A single swing gate is usually the least expensive automated option, and it leaves you a swinging gate rather than a track to maintain.
- Get the permit and HOA approval sorted first. A project that clears approval before materials are ordered runs smoother and avoids rework.
- Bundle the operator with the gate. Quoting the gate and the operator together usually costs less than installing a manual gate now and automating it later.
- Ask what’s reusable. If you already have a gate that’s structurally sound, we can often install an operator on it instead of replacing the whole gate. One call covers it.
Our estimates are free, and we’ll walk the gate line with you and put the numbers in writing. Call (888) 356-9186 to book an on-site estimate.
FAQs – Gate Installation Cost
How much does gate installation cost in Alexandria?
A single swing gate on a residential driveway typically runs $1,800-$3,200, and a full automated double driveway system runs $3,500-$7,500. Manual gates start around $900. The written estimate sets the final price. Call (888) 356-9186 for a free estimate.
Is it cheaper to install a manual gate or an automated one?
A manual gate is cheaper up front, usually $900-$1,800 for a single leaf versus $1,800-$3,200 automated. But automating later means paying for a second visit, so quoting the gate and operator together usually costs less overall. Call (888) 356-9186 and we’ll price both options side by side.
Do I need a permit to install a gate in Alexandria?
Most cities require a permit for a new gate, fence line or electrical work, so ask Alexandria’s building department before you build. HOAs and historic districts often require design approval on top of the permit. We’ll flag what’s likely needed for your property during the estimate; call (888) 356-9186.
Can you install a gate operator on my existing gate?
Often yes, if the gate is structurally sound and the posts are solid. Operator installation typically adds $1,300-$2,800 for a swing gate or $1,500-$2,800 for a sliding gate, on top of any gate repair needed first. Call (888) 356-9186 and we’ll tell you whether your existing gate is a candidate.
How long does gate installation take in Alexandria?
Most residential gate installations take one to three days once materials and approval are in hand, with the electrical run adding time. Complex commercial or HOA entry systems can run a week or more. We’ll give you a realistic timeline with the written estimate; call (888) 356-9186.
Why Choose a Gate Specialist for Your Installation
An automated gate ties together a mechanical structure and an electrical control system, and a problem in either one stops the gate. We work on both halves of that system, which is why a single call handles the whole job, from the motor to the hinge. Whether your gate won’t open, won’t close, or was never installed right, we fix it.
We service the nine brands we’ve listed, so there’s no need to check whether we can work with your existing system first. And because we’re not a garage door company doing gates on the side, there’s no learning curve. Our technicians have up to 12 years of experience with gates specifically. For customers in the area, our Alexandria page has more on how we work locally.
Safety matters here. An automated gate carries real force, and the operator’s wiring and power run at household voltage. Heavy gate panels can crush if they fall, and a sliding gate can come off its track. We set reversing sensors and safety loops as standard so the finished gate is safe to operate, and we recommend a trained professional handle any operator wiring or electrical work rather than attempting it yourself.
Contact Us for a Free Gate Installation Estimate
If you need a new gate, an operator installed, or a full automated entry system for a home or commercial property, we’ll come out, walk the gate line, and put the numbers in writing. Estimates are free, and we work on the brand you already have or help you pick a new one. Call (888) 356-9186 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Alexandria market as of 2026. Alexandria Gate Repair offers free estimates – call (888) 356-9186.
What Our Customers Say
"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Vivian Nguyen"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Kurt Bennett"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Jason Thompson