Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across McNair
If your automatic driveway gate won’t open, won’t close, or answers a remote with nothing but silence, we can help. Alexandria Gate Repair handles electric gate repair across McNair, from the operator and control board to the hinges holding the panel. Our technicians have up to 12 years of experience, and we work on the brand you already have.
We know this part of western Fairfax County well. McNair’s gates sit in planned communities where the equipment was installed during the 2000s and 2010s build-out, and that shapes what we fix here. It’s rarely rust and rot. It’s boards, keypads, and operators wearing out on gates that are otherwise sound. Call (888) 356-9186. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why McNair Homeowners Call Alexandria Gate Repair for Electric Gate Repair
Most of the calls we get in McNair come from people who already know their brand. They want to hear that we service Linear or LiftMaster before they book anything. That’s a reasonable question, and the answer is yes. We’re familiar with nine major gate automation brands, so the conversation starts at the actual diagnosis instead of a sales pitch for a new system.
We specialize in gates, not garage doors or general property work. Every technician we send works on gate systems and nothing else. That focus shows up in the details: knowing which control boards are now obsolete, which operators can take a retrofit module, and how entrapment protection gets wired when a community gate was installed before those rules tightened.
Our reputation in McNair rests on that focus and on doing what we said we’d do. The estimate you get is the price you pay, set in writing before any work starts. Response time to McNair is quick because we know the streets and the layout of these communities. Call (888) 356-9186 and we’ll get you on the schedule.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Access Control in McNair
Gate Access Control in McNair usually means one thing for a homeowner: the keypad no longer opens the gate, or the remote works for some family members and not others. We diagnose the whole chain rather than guessing. That means checking the keypad, the receiver, the board input, and the wiring between them before recommending anything.
In McNair’s denser communities, a single access point often serves several households, so a failed keypad entry disrupts more than one driveway. We can repair the existing unit, replace it, or move you to a modern keypad or remote system that works with the operator you have. A typical keypad or remote repair in McNair runs $150 – $320. Call (888) 356-9186 for an exact quote; estimates are free.
Keypad and Remote Faults
Keypads fail from moisture in the housing and from worn membrane buttons. Remotes fail more often at the receiver or the battery contacts. We test both before we quote so you’re not paying to replace a part that works.
Wiring and Receiver Repairs
The wiring run between a keypad and the operator is where low-voltage problems hide. Rodent damage, corroded splices, and loose terminals all cause intermittent access failures. We trace the circuit and repair the fault rather than swapping components until something works.
Commercial Gate Operator in McNair
Commercial Gate Operator work in McNair means community entry systems, shared driveway gates, and multi-unit access points where a single failure affects everyone behind it. Property and HOA managers are usually the ones calling. The diagnosis is the same one we do on a residential gate, but a commercial operator has more cycles on it and more people waiting for it to work.
We handle the operator itself, the safety edges, the loop detectors, and the access control tied into it. If the unit is from the original 2000s build-out and parts are unobtainable, we’ll tell you plainly instead of ordering a board that won’t arrive. A typical commercial operator repair in McNair runs $350 – $900, and a full operator replacement runs $1,800 – $4,200 depending on the system. Call (888) 356-9186 for a written estimate before any work is scheduled.
Sharing Access Across Multiple Units
Shared entry systems need the controller, the keypad directory, and the safety devices all working together. When one unit’s code fails while others work, the problem is usually in the controller rather than the operator. We can sort that without shutting down access for everyone.
Replacing Legacy Controllers
Older commercial controllers often can’t accept modern safety edges or remote access hardware. We check what the existing controller supports before recommending a replacement, because a retrofit board is often far cheaper than a full operator swap.
Trusted Brands We Service in McNair
We work on the major gate brands you’ll find across McNair’s planned communities, including Linear, Viking, Ghost Controls, and DoorKing. Whether your system is a Linear residential operator on a driveway gate or a DoorKing entry unit serving a community, our electric gate repair team diagnoses the actual fault rather than pushing a brand switch. We don’t stock parts on a truck, but we know which components are still available and which have been discontinued, and we’ll tell you upfront so there are no surprises on arrival. Fast turnaround comes from knowing the equipment, not from guessing.
Common Electric Gate Repair Problems We See in McNair Homes
- Failed control boards on 2000s-era operators. The LiftMaster and Linear boards installed during McNair’s build-out are now reaching the end of their service life. When a board fails, the gate stops cycling from the keypad or remote even though the motor itself is fine.
- Sagging swing gate hinge posts. Posts set in developer-era fencing settle or rot at the footing, and the panel starts dragging on the ground. The operator isn’t the problem – the gate is binding, and correcting the hinge post is handled separately from any electrical work.
- Slide gate track and photocell jams. Northern Virginia’s humid summers and freeze-thaw winters push leaves and debris into the track and across the safety photocells. The operator reads a false obstruction and reverses, and the gate never completes a full cycle.
- Keypads and receivers dropping communication. Moisture in the housing and corroded low-voltage splices cause intermittent access failures. These show up more often on gates facing the weather than on sheltered entry points.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in McNair, VA
We quote per job after we’ve seen the gate, and the written estimate sets the final price. No work starts before you’ve agreed to it. To give you a realistic starting point, a typical keypad or remote repair in McNair runs $150 – $320, control board replacement runs $250 – $600, a gate motor or operator repair runs $300 – $750, and a full operator replacement runs $1,800 – $4,200. Safety sensor and photocell repairs usually land in the $150 – $350 range, and a hinge or sag correction runs $200 – $500 depending on what the footing needs.
What moves a price is the state of the existing equipment. A board that’s still available is a straightforward part swap. An obsolete board on an otherwise solid gate may push the job toward a full operator upgrade, and we’ll lay out both options with the numbers so you can decide. Estimates in McNair are free. Call (888) 356-9186 to book one.
We Also Serve Cities Near McNair
McNair sits in a tight corner of western Fairfax County, and we cover the communities around it. If you’re in McNair and just outside the boundary, or in Hutchison, Dranesville, Herndon, or Floris, the same gate repair work applies and the same technicians handle it. Call (888) 356-9186 and we’ll confirm your area before scheduling.
Serving McNair, VA – Our Local Coverage Area
We serve McNair and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in McNair
It could be either, and testing the circuit is the only way to know. We check the keypad output, the wiring run, and the board input in sequence. If the keypad sends a signal and the board ignores it, the board is the fault. If no signal leaves the keypad, the keypad or its wiring is. Call (888) 356-9186 for an exact quote; estimates are free.
Yes, in most cases. A sagging gate usually has a hinge post that settled or rotted at the footing, and correcting that post restores the panel without replacing it. Once the gate hangs true, the operator stops binding and cycles normally again. We’ll confirm the panel is sound before recommending a fix over a replacement. Call (888) 356-9186 to have it looked at.
Repair is cheaper when the parts are still available, and replacement makes more sense once the board and motor are both obsolete. On McNair’s 2000s and 2010s gates, we’re seeing more obsolete boards than we used to, which tilts more jobs toward an operator upgrade. We’ll price both options in writing so the decision is yours. Call (888) 356-9186 to get the numbers.
It’s almost always the safety photocells reading a false obstruction. Summer humidity fogs the lenses, and debris collects in the track and across the beam. The operator does exactly what it’s designed to do and reverses. Cleaning the path and the lenses often solves it, but a failing sensor needs replacing. Call (888) 356-9186 and we’ll diagnose which it is.
Yes, and it’s worth taking seriously. A gate hung before current entrapment rules were in place may lack functioning safety edges or photocells, and those devices are what stop a gate on a person or vehicle. Retrofitting protection onto a legacy operator is often possible, though some older boards can’t accept modern safety devices. We’ll tell you which side of that line your system falls on. Call (888) 356-9186 for a free estimate.
Call Alexandria Gate Repair for Electric Gate Repair in McNair
Whether your gate won’t open, won’t close, or was never installed right, one call covers it. We repair the automation and the mechanical side, we work on the brand you already own, and we give you a written price before anything starts. Call (888) 356-9186 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Alexandria Gate Repair.