Electric Gate Repair in Alexandria - On-Site in 60 Minutes, Fixed the Same Day

Trusted Electric Gate Repair for Alexandria Homeowners

An electric gate that stops working leaves a driveway wide open and a property manager fielding calls from tenants. That’s the problem we solve, and it’s the only thing we solve. Alexandria Gate Repair handles electric gate repair across Alexandria, VA, from the motor and the control board down to the hinge and the track. Our technicians have up to 12 years of experience, and we answer the phone 24/7 with fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is available across the city. Whether your gate won’t open, won’t close, or was never installed right, we fix it. Call (888) 356-9186 and we’ll get a technician out to look at it.

Call (888) 356-9186

Gate Opener Repair

Gate Opener Repair covers the unit that drives the gate itself: the arm, the motor housing, the limit switches and the control board that tells it when to stop. When a gate opens partway and stalls, runs on after it should have stopped, or clicks without moving, the opener is usually where the fault sits. We diagnose the actual failure instead of quoting a full replacement on the first visit. We work on the brand you already have, including Linear and Ghost Controls systems common on Alexandria driveways, and we handle both the mechanical structure and the electronics behind it. Typical Gate Opener Repair in Alexandria runs $250 to $650 depending on whether we’re replacing a control board, a limit switch, or the opener itself. Repair work starts at $150 to $350 for simpler fixes. You get a written price before any work begins.

Control Board and Limit Switch Failures

A control board that’s failed often looks like a motor problem: nothing moves, or the gate reverses without warning. We test the board and the limit switches separately so you don’t pay for a motor you don’t need. If the board is the fault, we tell you straight.

Arm and Chain Drive Repairs

Arm-style and chain-driven openers wear at the pivot points and the chain tension over years of use. We replace worn arms, re-tension chains and check the drive gears before they strip. Most of these repairs are done in a single visit.

Automatic Gate Repair

Automatic Gate Repair addresses the whole system working together: the opener, the safety edges, the sensors and the gate’s own mechanical movement. You need it when the gate behaves unpredictably, stops mid-travel, reverses on nothing, or won’t respond to a remote. We treat the automation and the gate structure as one system because that’s how they fail. A binding hinge will trip a safety sensor just as reliably as a bad photo-eye. Technicians with up to 12 years of experience test the full sequence rather than replacing parts until something works. Brand-agnostic diagnosis means we find the real fault, not the easiest one to sell. Automatic Gate Repair in Alexandria typically runs $150 to $400 for sensor, safety edge and travel adjustments, with more involved repairs reaching $650. Call (888) 356-9186 for a free estimate on your specific gate.

Safety Edge and Photo-Eye Testing

Safety edges and photo-eyes are the parts that stop a gate on an obstruction, and a failed one is both a reliability and a safety issue. We test every safety device on the gate and replace what’s failed. It’s the first thing we check on any automatic gate that reverses.

Track and Hinge Adjustments

A gate that drags, scrapes or sits out of level puts strain on the operator and shortens its life. We adjust tracks, hinges and rollers so the gate moves freely under its own weight. A gate that rolls clean puts far less demand on the motor.

Electric Gate Motor

Electric Gate Motor work covers the drive unit itself, the component that turns electrical power into a gate that moves. The motor needs attention when it hums without moving, runs hot, trips the breaker, or strains audibly on every cycle. Often the motor is fine and the problem is upstream in the wiring or downstream in the gate’s resistance, so we test both before recommending a replacement. We service electric gate motors from brands like Viking and DoorKing, and we handle the electrical side of the work as part of the same visit. Replacing a failed motor in Alexandria typically runs $450 to $1,200 depending on the gate’s size, weight and slide-versus-swing configuration. Smaller motor repairs, like a capacitor or a start winding, come in lower at $150 to $400. Every price is quoted and agreed before we start.

Motor Replacement and Sizing

An undersized motor on a heavy gate fails early, and an oversized one is wasted money. We match the motor to the gate’s weight and how often it cycles per day. Get that calculation right and the unit lasts.

Power and Wiring Checks

The wiring that feeds a gate motor is a genuine safety concern for anyone without electrical training, and we don’t recommend homeowners work on it. We test the power supply, the low-voltage control wiring and the connections at the motor. Faulty wiring is a common cause of a motor that seems dead.

Gate Access Control

Gate Access Control covers how people get through the gate: keypads, remotes, intercoms, card readers, exit loops and the receivers that tie them together. You need it looked at when a keypad stops accepting codes, remotes work only from a distance, or an entry system won’t release the gate at all. Property and HOA managers in Alexandria rely on us for this because we handle the access hardware and the gate operator behind it in the same visit, so there’s no back-and-forth between two trades. We service access control on DoorKing and Linear systems among others, and we diagnose whether the fault is the reader, the receiver or the operator’s own logic board. Gate access control work in Alexandria typically runs $150 to $450 for keypad, receiver and remote repairs, with intercom and card reader work priced on the components involved. Call (888) 356-9186 and we’ll give you a written estimate before anything starts.

Keypad and Remote Programming

A keypad with a dead button or a receiver that no longer accepts remotes leaves people stuck at the gate. We test the signal path and reprogram or replace the hardware as needed. We’ll show you how to add a new remote before we leave.

Intercom and Card Reader Faults

Intercom and card reader faults often trace to a single loose connection or a power supply that’s dropped out. We trace the circuit back to the source instead of swapping readers. That saves you money and gets the entry point working.

Commercial Gate Operator

Commercial Gate Operator service covers the heavier automated entry systems on multi-unit properties, HOAs, parking areas and gated communities, where the gate cycles many times a day and downtime blocks residents and deliveries. You need a specialist when the operator overheats, trips constantly, or can’t keep up with traffic volume. Commercial operators from Linear and DoorKing are built for duty cycles a residential motor can’t handle, and when one is installed or set up wrong it fails fast. We work on both the operator and the access control on the same system, which is what a property manager needs. Commercial gate operator repair in Alexandria typically runs $350 to $900 depending on the operator’s class, and full replacement runs higher, priced per job after we assess the site. We give property managers a written scope and price before work begins.

Duty Cycle and Traffic Load

Duty cycle is the measure of how hard an operator works before it needs to cool down, and a gate that opens constantly needs an operator rated for it. We check the duty cycle against the real traffic the site sees. If the operator is undersized, that’s where the failures come from.

Property Manager Reporting

Property managers need a clear diagnosis in writing, not a vague “needs service.” We document what failed, what we did and what the price was. That record helps with HOA reporting and with planning a replacement before a failure strands residents.

Brands We Service

We work on the brand you already have. A gate specialist who knows five systems can’t help the neighbor with DoorKing access gear, and a generalist guessing at a FAAC control board wastes everyone’s time. We’re familiar with nine major gate automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule. That range means most Alexandria homeowners and property managers won’t need to start over with a new system just to get service.

We service Linear equipment and know where its receivers and control boards wear out. We service Viking operators and understand their motor and limit-switch behavior on older units. Whether you have a Ghost Controls opener on a residential driveway or DoorKing gear running a gated community entry, we can help. And whether you have any of these brands or any other make, we can help, because we diagnose the problem before we ever talk about parts.

Signs You Need a Pro Right Now

• The gate reverses on its own: Reversing without an obstruction usually means a failed safety edge or a photo-eye out of alignment. These are the parts that protect anyone standing in the gate’s path, so it’s worth having them checked quickly rather than waiting for the gate to stop working entirely.
• The motor hums but the gate doesn’t move: A motor that makes noise without moving the gate points to a stripped drive gear, a failed capacitor or seized hinge hardware. Running it this way can burn out the motor itself, turning a smaller repair into a replacement.
• The gate drags or scrapes the ground: A gate that scrapes is out of level or the track and hinges have worn, and the operator is working harder than it should on every cycle. Left alone, that extra load shortens the motor’s life and strains the whole structure.
• The remote or keypad stops working: When a keypad or remote fails, the gate may look fine but nobody can get through it cleanly. This often comes down to a receiver, a power supply or a programming fault, and it’s usually a quick diagnosis.
• The breaker trips when the gate runs: A gate that trips a breaker each time it cycles points to a wiring or motor fault that needs a trained eye. Electrical problems on a gate are dangerous to troubleshoot without the right tools, so it’s worth having us look rather than digging into the panel yourself.

Our Process, Step by Step

1. 1
   We take your call and get the details. We answer 24/7, and we’ll ask about the gate type, the brand and what it’s doing so the technician arrives prepared. Fast dispatch runs 7am to 7pm, Sunday through Friday, and same-day service is often possible on non-installation repairs.
2. 2
   On-site diagnosis. The technician tests the operator, the safety devices, the power supply and the gate’s mechanical movement as one system. We use a multimeter on the wiring and test each component against spec rather than guessing which part failed.
3. 3
   Clear findings and a written price. You get the diagnosis in plain terms, the options for repair, and a written estimate. The price is quoted and agreed before any work starts, so nothing on the invoice surprises you.
4. 4
   Repair with the right parts. We carry out the repair and test the gate through a full open-and-close cycle, including every safety device, before we call it done. You see the gate operate correctly before we leave.
5. 5
   Handover and follow-up. We explain what failed and what to watch for, and we’re a phone call away if anything isn’t right. One call covers it, from the motor to the hinge.

How Much Does Electric Gate Repair Cost in Alexandria?

Our Service Area Near Alexandria

We provide electric gate repair across Alexandria and the surrounding communities, including Woodbridge, Potomac Mills, Union Mill, County Center, Greenbriar, Leesylvania, Floris, Herndon, Manassas Park, Dranesville and Yorkshire. Our technicians travel throughout these areas with fast dispatch from 7am to 7pm, and same-day service is often possible on non-installation repairs. If you’re outside these areas, call and we’ll confirm our coverage and the earliest appointment. Homeowners in Woodbridge and property managers in Potomac Mills get the same specialist service as our Alexandria customers.

Frequently Asked Questions About Electric Gate Repair in Alexandria

Schedule Your Electric Gate Repair Service in Alexandria Today

When your gate stops working, the fastest fix is a call to a gate specialist. Call (888) 356-9186 for a free, no-obligation estimate on electric gate repair in Alexandria. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Whether it’s the opener, the motor or the access control, we’ll diagnose the real problem and give you a written price before any work starts. For the full range of Alexandria Gate Repair services, including new installations and gate repair, one call covers it.

Written by the team at Alexandria Gate Repair.