Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Alexandria?
Gate parts and welding in Alexandria typically run $150 to $850 for common repairs, with most residential jobs landing between $220 and $480 once parts and labor are combined. A simple hinge weld or latch replacement sits near the low end, while operator board swaps, track repairs, and custom fabrication push toward the top. The written estimate we give you on-site sets the final price, and that estimate is free.
The range is wide because a gate is two systems bolted together: the mechanical structure (posts, frame, hinges, wheels, latches) and the automation (motor, board, sensors, wiring). A repair can sit entirely in one or straddle both. We diagnose the actual failure before quoting a number, which is why we ask what your gate is doing before we roll a technician.
Key Takeaways
- Most Alexandria gate parts and welding jobs fall between $220 and $480; the full spread for common work runs $150 to $850.
- Welding labor alone is typically $95 to $220 per repair, and it’s separate from parts.
- Automation parts (control boards, motors, sensors) usually cost more than mechanical hardware.
- We service the brand you already have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
- Free estimates. Call (888) 356-9186. We answer 24/7.
Gate Parts & Welding Cost Breakdown (2026)
Here’s where the money goes on a typical gate parts and welding job in the Alexandria market. Each line is a range; final pricing depends on your gate’s size, weight, and what’s actually broken.
| Line Item | Typical Estimated Range |
|---|---|
| Welding labor (hinge, post, frame, bracket) | $95 – $220 |
| Hinge replacement (parts + labor) | $120 – $260 |
| Latch or lock hardware replacement | $90 – $210 |
| Roller and track repair (sliding gates) | $140 – $340 |
| Operator control board replacement | $280 – $620 |
| Motor and gearbox replacement | $380 – $850 |
| Safety sensor and photo-eye replacement | $120 – $280 |
| Custom metal fabrication (new bracket, frame section) | $180 – $700 |
What pushes a job toward the top of these ranges comes down to a few things. Heavier gates (steel double-drive units, commercial swing gates) mean more welding time and heavier hardware. Underground wiring or conduit work adds labor and often a permit. Out-of-production boards or motors, especially on older equipment, can cost more than the current generation – but we work with what you own rather than pushing a brand swap. And if the gate has structural damage at the post or hinge that needs to be straightened before hardware goes back on, that’s its own line.
What keeps a job near the bottom is usually simple hardware and a clean weld on an accessible gate. If your gate swings, slides, and lines up properly once the failing part is swapped and the weld is set, that’s the quick end of the range.
What Affects Gate Parts & Welding Pricing in Alexandria
Every job prices differently. These are the factors that move the number up or down the most in this market.
- Mechanical vs. automation failure. A snapped hinge or bent bracket is welding plus hardware. A dead control board or a motor that hums without moving is electronics, which usually costs more. A single failure can have either root cause, so diagnosis comes first.
- Gate type and weight. A light residential aluminum swing gate is faster to repair than a heavy steel slide gate with exposed track and rollers. Weight, size, and drive type all translate to labor hours.
- Access and site conditions. A tight side yard, an interior courtyard, a gate buried behind landscaping, or clearance issues on a narrow Alexandria property line slows the work and adds time to the estimate.
- Brand and part availability. Common brands with wide parts distribution sit at the lower end. Older or discontinued boards and motors can take longer to source and cost more when found. That’s why we cover nine major automation brands: to keep the repair in your equipment’s ecosystem rather than forcing a swap.
- Permits and code. Most cities require a permit for certain gate and electrical work, so ask your city’s building department what applies before scheduling. Permit fees are separate from our labor.
- Custom fabrication. Straight parts swaps are one thing. Fabricating a new bracket, hinge mount, or frame section that isn’t available off the shelf means shop time and welding, and that lands higher on the range.
If you’re on a commercial or multi-unit property, plan for access control and safety sensor integrity checks on top of the part repair. Those are part of a complete job on any automated entry system, and we diagnose them at the same visit.
How to Save on Gate Parts & Welding in Alexandria
The biggest lever on the price is a fast, accurate diagnosis. Gate failures rarely get cheaper by waiting. A hinge that’s starting to tear turns into a bent post, and a sensor that’s misreading turns into a motor that works overtime until it fails. Catching either early usually keeps you in the lower part of the range.
- Get the free written estimate. We diagnose and quote on-site so you see the parts and labor as line items before any work starts. Call (888) 356-9186 to book it.
- Fix mechanical issues before they cascade. A loose hinge or worn roller is a small repair. Left alone, it can pull the post out of line or bind the track, which turns into fabrication and welding.
- Stay with your existing brand. We work on the brand you already have, so you’re repairing the system rather than paying to swap out a working platform because of one broken part.
- Bundle the small stuff. If a technician is already on-site for a board swap, having them replace a cracked photo-eye or a worn latch at the same visit is usually less than a second callout.
- Know your permit situation up front. Ask the city what your job requires before scheduling so the permit cost doesn’t surprise you after the quote.
Gate specialists, not generalists. Our technicians have up to 12 years of experience, and that’s concentrated on gate systems and their automation rather than split across unrelated trades. The faster the diagnosis, the tighter the estimate.
FAQs – Gate Parts & Welding Cost
How much does gate welding cost in Alexandria?
Gate welding labor in Alexandria typically runs $95 to $220 per repair. The exact figure depends on what’s being welded: a hinge bracket and a full frame section are different jobs. Parts are quoted separately. Call (888) 356-9186 for an exact quote; the estimate is free.
Is it cheaper to repair the gate or replace it?
Repair is usually cheaper unless the frame or the automation is failing in multiple places at once. A single hinge, latch, control board, or motor is typically $120 to $850 to fix. When the post is bent, the track is shot, and the operator is on its way out, the repair total can approach a new installation, and that’s the point to talk through replacement. We’ll tell you which side of that line your gate is on when we look at it.
Can you come today?
Same-day service is often possible. Call (888) 356-9186. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
Do you work on my brand of gate?
We service nine major gate automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you already know your brand, that list is the quickest way to confirm we can service your system. If you don’t know it, we’ll identify it on-site before quoting the repair.
How much does an automated gate repair cost versus a manual gate?
Automated gate repairs usually cost more, typically $280 to $850 when the board or motor is involved, versus $90 to $340 for most manual mechanical repairs. The automation adds electronics, sensors, and wiring that the manual gate doesn’t have. Call (888) 356-9186 for an exact quote on your system; estimates are free.
Gate Parts & Welding Across Alexandria
Property managers and homeowners across Alexandria call us for the same reasons: a gate that won’t open, won’t close, or was never installed right. From the motor to the hinge, we handle both sides of the system – repair, electric gate repair, and new gate installation – so one call covers it. Whether you’re managing a multi-unit entry system or a single driveway gate, our technicians bring up to 12 years of experience to the diagnosis.
For a broader look at what we service, Alexandria Gate Repair is the place to start, and from there we can narrow the job down to the part and the price before your technician arrives.
Contact Us for a Free Estimate
Call (888) 356-9186 for a free estimate. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday. We work on the brand you already have, quote the job in writing, and give you the diagnosis before you commit to anything. Gate specialists, not generalists – from the motor to the hinge, we handle it.
Pricing reflects the Alexandria market as of 2026. Alexandria Gate Repair offers free estimates – call (888) 356-9186.
Written by the team at Alexandria Gate Repair.
What Our Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Cedric Boyd"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Craig Quinn"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Jason Thompson