Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Dranesville
If your driveway gate won’t open, closes on its own, or stops halfway and reverses, you’re likely dealing with an operator or control problem rather than the gate itself. We repair electric gates across Dranesville, and because we work only on gates, we can usually tell you what’s wrong before we arrive. Dranesville’s housing runs older than most of Northern Virginia’s new suburbs, and that changes how gate repair works here. Call (888) 356-9186. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Dranesville Homeowners Call Alexandria Gate Repair for Electric Gate Repair
We serve Dranesville as a gate-only operation, which matters when your system is fifteen or thirty years old and the parts have stopped being made. A general garage door company will look at a legacy operator, shrug, and quote you a whole new gate. We diagnose the actual failure first.
Our technicians have up to 12 years of experience, and they’ve seen the older LiftMaster and Linear units that dominate Dranesville properties, along with DoorKing systems on larger shared entrances. We’re licensed, insured, and we quote the price before any work starts, so there’s no invoice surprise when the job wraps.
Response time to Dranesville is quick because it sits inside our core service area, close to the W&OD Trail corridor and the older Herndon lots. Most calls here turn on the same handful of problems – a board that gave out after a surge, a post that shifted, or a sensor knocked out of line by a falling limb. Knowing that in advance means we bring the right parts and ask the right questions on the phone.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Electric Gate Motor in Dranesville
An Electric Gate Motor job in Dranesville usually means one of two things: the motor itself has failed, or the gate has grown too heavy and out of line for the motor to move. On the mature lots around Dranesville, the second is far more common. A wooden swing gate that has absorbed twenty summers of humidity and sits on a post that shifted in clay-heavy soil will bind, and a perfectly healthy motor will strain or trip on it. Replacing the motor without fixing the gate geometry just burns out the new unit.
A typical electric gate motor repair in Dranesville runs $350 to $850, and a full motor replacement typically lands between $900 and $2,100 depending on the operator and whether the gate needs re-hanging. The written estimate sets the final price, and we give it before we start.
When the Motor Strains but Hasn’t Failed
A motor that hums, groans, or overheats without moving the gate is often fine. The load has changed, not the motor. We test the operator under load and measure how much drag the gate leaf adds before recommending anything.
Legacy Operators and Parts Availability
Some Dranesville motors from the 1980s and 1990s no longer have replacement parts. When that happens, we tell you honestly and compare a retrofit against a full operator swap so you can see which costs less over the next several years.
Gate Access Control in Dranesville
Gate Access Control in Dranesville often means a keypad that’s stopped accepting codes, a remote that only works from ten feet away, or an entry system on a shared driveway that no longer lets the right people in. These problems are frequent on older properties here because the access hardware has been patched and re-patched over the years without a full reset. We handle keypad repair, remote control repair, and control board work on the brands already installed, including Linear and DoorKing systems common on multi-unit entrances.
Typical pricing: keypad repair runs $150 to $400, remote and receiver work $120 to $350, and control board repair or replacement $250 to $700. Prices are quoted and agreed before any work starts.
Keypads, Remotes, and Weather Exposure
Outdoor keypads on Dranesville lots take a beating from humid summers and freeze-thaw winters. Moisture gets into the housing and the contacts corrode. We test the keypad at the wiring before assuming the unit is dead.
Shared Entrances and Multi-Unit Access
Where a driveway or property entrance serves several households, access control failures affect everyone. We diagnose the whole chain – keypad, receiver, board, and wiring – rather than swapping one part and hoping.
Trusted Brands We Service in Dranesville
We work on the brand you already own. That includes LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, nine major automation brands under one roof. If your Dranesville gate runs a Linear board from the 1990s or a DoorKing unit on a shared entrance, we know how it’s wired and how it fails. We don’t stock parts, but we source them quickly and diagnose the real problem instead of pushing a brand switch. One call covers motor, board, and access hardware.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Dranesville Homes
- Legacy control boards failing after surges or humidity. The older LiftMaster and Linear boards on Dranesville gates often die with no replacement available, which forces a retrofit decision.
- Hinge post rot or frost heave in clay-heavy soil. When the post shifts, the leaf sags and binds the operator, so the gate acts like the motor has failed when it hasn’t.
- Safety photocells and loop detectors knocked out by falling limbs. Mature oaks and maples along established lots constantly drop debris, misaligning sensors so the gate reverses or refuses to close.
- Wooden gates that swelled and never shrank back. Dranesville’s humid summers and freeze-thaw winters work wooden leaves out of true, dragging hinges and straining the opener.
Pricing for Electric Gate Repair in Dranesville, VA
Electric gate repair in Dranesville typically ranges from $150 for a sensor realign to around $2,100 for a full operator replacement, and the written estimate sets the exact figure before any work begins.
What you’ll pay depends on three things: whether the problem is in the operator or the gate structure, whether parts for your board are still made, and how much re-hanging or post work the gate needs. A keypad repair at $150 to $400 is a very different job from resetting a frost-heaved hinge post and retrofitting entrapment protection. We give a free estimate, put the numbers in writing, and don’t start until you agree. If replacement turns out to be cheaper than repair, we’ll tell you that first.
We Also Serve Cities Near Dranesville
We work throughout the surrounding area as well, including Hutchison, McNair, Herndon, and Sterling. If your gate is just outside Dranesville, we can reach you on the same schedule and give you a free estimate on the same terms. Call (888) 356-9186 to book.
Serving Dranesville, VA – Our Local Coverage Area
We serve Dranesville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Dranesville
The opener is fine; the gate is binding. On older Dranesville lots this is almost always a sagging hinge post or a leaf that’s swollen and dragging on the ground, so the motor strains against a load it was never sized for. We check the gate geometry before touching the operator, and we quote the fix before starting. Call (888) 356-9186 for a free estimate.
Sometimes yes, sometimes the board is out of production and a retrofit is the honest answer. We check parts availability for older LiftMaster and Linear boards before recommending anything, then show you the retrofit cost against a full operator swap. The written estimate sets the final price. Call (888) 356-9186 to book an on-site estimate.
Yes, and it’s a common find on gates hung before modern entrapment protection was standard around Dranesville. A gate that closes without a sensing edge or photo-eye can crush or trap a person or vehicle, so we fit a modern entrapment-protection kit as part of the repair. Never test a gate’s closing force by hand. Call (888) 356-9186 for a free estimate.
Wind-driven rain gets into the keypad housing and corrodes the contacts, or a falling limb knocks a sensor or loop detector out of line. We test at the wiring before replacing anything, so you don’t pay for a new keypad when the real fault is upstream. Call (888) 356-9186 for an exact quote.
In most cases it can be repaired, and that’s usually the cheaper path on mature Dranesville lots. Re-hanging a sagging leaf and resetting the post often frees the opener entirely at a fraction of a full replacement. If the operator itself is shot and parts are gone, we’ll price both honestly. Call (888) 356-9186 for a free estimate.
Every Dranesville gate repair starts with a real diagnosis and a written price you agree to first. Whether your gate won’t open, won’t close, or was never installed right, we fix the motor, the board, the hinge post, or the safety gear your neighbors’ newer installs have had from day one. Call (888) 356-9186 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Alexandria Gate Repair.