Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Access Control Cost in Alexandria?
Gate access control in Alexandria typically costs $650 to $1,400 for a single automated swing or slide gate opener with keypad or remote entry, and $1,800 to $4,500 for a multi-unit entry system with intercom, telephone entry, and vehicle detection. Standalone repairs to an existing access system – a dead keypad, a failed photo-eye, a stuck loop detector – usually run $180 to $450. Every price we quote for gate access control work in Alexandria is set per job by a written estimate, and that estimate is free.
We’re gate specialists, not generalists. Whether your gate won’t open, won’t close, or was never installed right, we work on the brand you already have. Our technicians have up to 12 years of experience with systems from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so a call to us usually starts with “yes, we know that model” rather than a search for someone who does.
If the entry point on an Alexandria driveway or property boundary has stopped responding to a remote, a keypad code, or the apartment intercom, the fastest path to a firm number is a phone call: Call (888) 356-9186. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. An on-site estimate is free, and we’ll tell you straight whether the fix is a repair or a replacement.
Key Takeaways
- Typical access control installation in Alexandria: $650 to $1,400 for a residential opener and entry device; $1,800 to $4,500 for a multi-unit telephone entry or intercom system.
- Typical repairs to existing access control: $180 to $450 for keypads, photo-eyes, loop detectors, remotes, and receiver boards.
- A single keypad or remote replacement is often the cheapest fix: $180 to $320 installed.
- We service the brand you already have – all nine of the major gate automation lines listed above – so diagnosis drives the fix, not a brand switch.
- Estimates are free and the written estimate is the final word on price.
Gate Access Control Cost Breakdown (2026)
The table below shows typical installed price ranges for access control work in the Alexandria market in 2026. These are estimates, not a quotation. Every job is different, and the written estimate sets the final price after we look at your gate.
| Item | Typical Installed Price |
|---|---|
| Keypad or remote replacement (single entry point) | $180 – $320 |
| Photo-eye (safety sensor) repair or replacement | $150 – $280 |
| Loop detector repair or replacement | $350 – $750 |
| Receiver, board, or control box repair | $220 – $550 |
| Single-call button or exit device install | $180 – $360 |
| Automated swing or slide opener, residential (includes entry device) | $650 – $1,400 |
| Telephone entry / intercom system (multi-unit or commercial) | $1,400 – $2,800 |
| Full access control system with vehicle detection and call button (commercial/HOA) | $2,400 – $4,500 |
What pushes a gate access control job toward the higher end of these ranges: the age of the wiring in the ground, whether vehicle detection is already in place or has to be cut and poured fresh, how many entry points the property has, and whether the gate itself needs mechanical repair at the same time. A newer opener on a gate with a rusted hinge or a grinding track will still misbehave, so we look at the motor and the hinge, not just the electronics.
What keeps the cost down: a clean existing conduit run, an intact control box, a brand that parts are still available for, and a single well-defined problem. A dead keypad on an otherwise healthy LiftMaster system is a short job. A ghost in the control board on an old unit with no documentation takes longer to trace. We tell you which one you’re looking at before we touch a tool.
What Affects Gate Access Control Pricing in Alexandria
- Gate type and weight. A light residential swing gate and a heavy commercial slide gate need different operators. The heavier the panel, the sturdier the operator and the closer we look at the hinge and footing before recommending a motor.
- Entry method. A simple remote or keypad is the cheapest access method. Telephone entry, intercom, and apartment directory systems cost more because the system has more pieces – a directory unit, telephone or network connection, and the wiring that ties them to the control box.
- Vehicle detection. Loop detectors buried under the drive and photo-eyes at the gate line add to the job. If loops must be cut and poured fresh, that’s the single biggest jump in labor on a typical system.
- Wiring condition. Older homes and properties in Alexandria often have access control wiring running through conduit that has cracked, filled with water, or been spliced multiple times over the years. Rewiring a run is faster and cheaper than chasing a fault through bad lines.
- Brand and parts availability. Working on a system we service – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – is faster than working on a brand with no parts support. If parts haven’t been made in a decade, replacement becomes the honest recommendation.
- Property type. A single-family driveway near Del Ray or a townhome in Old Town carries a smaller scope than an HOA entry gate or a multi-building property with a directory system. Commercial and multi-unit access control includes directory programming, tenant codes, and validation that every unit can get through.
How to Save on Gate Access Control
The cheapest gate access control job is the one that fixes the actual fault. Here’s how to get there without spending more than you need to.
- Get a free estimate before you replace anything. A surprising number of “the opener is dead” calls turn out to be a $180 keypad or a $150 photo-eye. Our free estimate tells you which side of the line your problem is on.
- Fix the small pieces first. If one remote has stopped working but keypad codes still function, start with a receiver or remote replacement rather than a whole new opener. That step alone usually lands in the $180 to $320 range.
- Combine the repair with the upgrade. If your control board is failing and you were already planning to add telephone entry or vehicle detection, doing the work in one visit saves the cost of two site visits and reduces wiring labor.
- Keep a written record of your system. Brand and model written down, remote programming codes noted, control box location known. This shortens every future service visit and often lets us quote over the phone before we come out.
- Don’t skip the mechanical check. A gate that binds on its track wears out motors fast. A hinge adjustment or roller replacement during a repair can add years to the access control system behind it.
- Call for an estimate early on. A small problem diagnosed promptly is almost always cheaper than a jammed gate that has been forced open and closed a hundred times. Call (888) 356-9186 for a free estimate; we’ll tell you what you’re dealing with and what it should cost.
Repair or Replace Your Access Control System?
If the system is under about 12 years old, parts for it are still in production, and the gate itself is mechanically sound, repair is almost always the right call. A $220 to $550 board or receiver repair on a healthy system avoids a $650 to $1,400 replacement.
Replacement makes sense when the brand is out of production, the control box has failed and been rebuilt more than once, or the property’s access needs have outgrown what the system can do – for instance, adding telephone entry to an HOA gate that was only ever remote-controlled. In those cases, we walk through repair cost, replacement cost, and what each option covers before you decide. One call covers it.
For the broader picture of what we do, see Alexandria Gate Repair, and for broader local coverage see Alexandria.
Same-Day Repair and What Happens When You Call
When you call us about a gate access control problem, we start with a few questions: what brand your system is, what it’s doing or not doing, and whether the gate itself moves freely. That conversation usually narrows the problem before we arrive, and it lets us tell you upfront whether we can quote over the phone or need to see it. Same-day repair is often possible. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
We dispatch a technician to your property, diagnose the gate and access control system together, and give you a written estimate before any work begins. If the fix is small – a keypad, a photo-eye, a receiver – we handle it. If it’s larger, you get a clear price and a real explanation, not a sales pitch for a brand switch.
FAQs – Gate Access Control Cost
How much does gate access control cost in Alexandria?
Typical gate access control work in Alexandria runs $180 to $450 for a repair to an existing system, $650 to $1,400 for a residential automated opener with entry device, and $1,800 to $4,500 for a multi-unit or commercial system with telephone entry and vehicle detection. Call (888) 356-9186 for an exact quote – estimates are free.
How much does a gate keypad cost to replace in Alexandria?
Installing a replacement gate keypad in Alexandria usually costs $180 to $320, including the unit and the labor. If wiring to the keypad has failed, the range moves toward the top. Call (888) 356-9186 for a free estimate on the exact jobs.
Is it cheaper to repair or replace my access control system?
Repair is almost always cheaper when the system is under around 12 years old and parts are available. A $220 to $550 control-board repair on a healthy opener beats a $650 to $1,400 replacement. Replacement makes more sense on out-of-production brands or when adding telephone entry and vehicle detection anyway. Call (888) 356-9186 and we’ll walk you through both options.
Can you work on my existing gate brand?
Yes. We service systems from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We work on the brand you already have. If you already know your system, tell us and we’ll confirm before we come out: call (888) 356-9186.
Can you come today for a gate access control problem?
Often, yes. Fast dispatch runs 7am to 7pm, Sunday through Friday, and same-day repair is frequently possible for a non-responsive keypad, remote, or control box. Call (888) 356-9186. We answer 24/7, and calls outside dispatch hours are booked into the next opening.
Get a Free Gate Access Control Estimate in Alexandria
We repair and install gate access control systems on both manual and automated gates, from a single driveway opener to a commercial entry gate with a full directory system. Gate specialists, not generalists: whether your gate won’t open, won’t close, or was never installed right, we fix it. Call (888) 356-9186 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Alexandria market as of 2026. Alexandria Gate Repair offers free estimates – call (888) 356-9186.
Written by the team at Alexandria Gate Repair.
What Our Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Rachel Whitaker"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."
- Hector Salazar"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Ryan Anderson